Stainless Oversized Tilt Steering Pins - Made in the USA

These pins will allow you to get rid of that annoying slop and repair your tilt steering column. Available as a single pin or as a pair. We are still trying to determine which models they fit, but we believe they fit the following models:

1976-1986 Jeep CJ

1987-1995 Jeep Wrangler YJ

1974-1983 Cherokee SJ

1984-1996 Cherokee XJ

1986-1992 Comanche MJ

1974-1991 SJ & J-Series pickups

Other Jeeps that used a Saginaw steering column

These pins are oversized replacements for tilt column pins that are 0.890 long and have diameters of 0.400 and 0.375. Shoot us an email with any questions.

Other possible causes of tilt slop

These pins cure the most common cause of tilt slop, specifically that the holes in the aluminum steering knuckles wear and deform over time. This is usually indicated by slop in the "12 O'clock to 7 O'clock" movement of the steering wheel. A far less likely, but often publicized cause, is that the 4 torx screws under the tilt mechanism are loose. This results in general wheel movement in every direction. Hopefully this distinction will help to determine which of the two scenarios you are experiencing.

Cost $15 for one pin

Cost $29 for two pins

Poor quality chinese fakes

It has come to our attention that there are poor quality chinese knock offs of our oversized column pins. These are the original oversized steering column pins. Please continue to support this US small business who manufactures all of our products here. Thank you.

Payment

Our preferred method of payment is Paypal. Shipping within the United States will be added to your order at checkout. For shipping to other countries, please email for details, or place an order and we will email you with the amount of the outstanding shipping. Thanks!

Contacting Unbalanced Engineering

Please feel free to email us regarding product questions or for ordering information via email by clicking here

All of our products are proudly made in the USA