Bilstein Race Shocks -- Front For Use With Stock Mounting Locations (1993-2002)

These Bilstein shocks are not the typical HD street Bilsteins but are true race shocks that are user rebuildable and revalable. They are custom valved to our specs based on your class, and spring preference based on our extensive testing. They also allow significantly more travel than stock shocks and are lighter than stock shocks as well.

These shocks are mounted in the stock manner with steel bushings and rod ends on the lower mounting. The upper mount consists of a CNC machined Chromoly adaptor that mounts to the stock upper hat which makes them CMC and ESP legal! Cost $950/pair

Bilstein Race Shocks -- Front For Use With Weld In Upper Rod End Mount (1993-2002)

These Bilstein shocks are the same shock body as those listed above but for classes that do not require stock mounting such as (NASA's American Iron or SCCA's SOLO2 Street Modified). They are set up to use a weld in upper mount. This setup allows for removal of the heavy rubber stock mounts, and does not require the custom made upper mounts. The upper mount is welded to the upper A arm mount plate. Cost $900/pair

Bilstein Race Shocks -- Front Coil Over Kit For Use With Bilstein Front Race Shocks

These coil over mounts allow the use of 2.5" race springs with your Bilstein front shocks. The coil over mounts include threaded body, adjuster/lower mount, upper mount, retraining clip, and an adaptor ring for the Bilstein shock body. Springs are NOT included but can be purchased separately. Cost $125/pair

Bilstein Race Shocks -- Rear (1983-2002)

The rear Bilstein kit uses a shorter version of the same race Bilsteins that our front setup uses. They mount in the stock location and in the stock manner which again makes them CMC and ESP legal. Since the rear mounting is less complex and therefore less costly we pass the savings on to you. Cost $845/pair

Bilstein Race Shocks and Spring Packages

We offer complete spring and shock packages using our Bilstein race shocks as well as Penske race shocks and have experience setting up cars for street, autox and road race applications. Please contact us so we can put together a custom package based on your needs. Thanks!

click here to email us

All of our products are proudly made in the USA